Design surface extend process Solidworks

Friday, March 11, 2016

In creating a design surface extend process, to create a different surface extend bodies with bodies initially is the first way described below is prepared in advance which of the surface did extend the surface, With the menu extend surface, we can extend the surface by selecting the edge, some edge, or face. To make the surface extends: Click the Extended surface on the toolbar or click Insert Surface, surface, Extend.in this case I use the following surface. The second is to please you perform the Offset Surface please enter the offset of 0 mm from the surface beginning then you already have two different surface bodies. Third please do hide bodies, in this case please hide bodies which would be the main bodies by right-clicking and then hide. After the hide one bodies the next step is please make the process extend to the bodies that are still visible today. With the above process, then you already have a new bodies are already extend surface. The fourth is to please you show that you hide bodies in the previous step, then please go to the feature Intersection Curve, after entering please and choose two bodies that have been created earlier. then OK. In the Property Manager: Under Edges / Faces to Extend, select one or more sides or face as desired. If we choose the edge, extending surface extends along the field edge. If we choose the face, extending surface extends along all sides of the face except those connected to the other face. we can make the surface extended to face tangent by clicking on the callout the which appears only if we choose the edge.

Sweep surface Solidworks

Saturday, March 5, 2016

To create a sweep surface: Create planes to sketch a sweep profile, sweep path, and if necessary, guide curves. Swept Surface To create a swept surface...Click Swept Surface (Surfaces toolbar) or Insert > Surface > Sweep Parts and Features > Features Sweep PropertyManager Sketch a profile and a path to follow, then click Swept Boss/Base (Features toolbar), Swept Cut (Features toolbar), or Swept Surface (Surfaces toolbar... Parts and Features > Features Creating a Sweep Swept Cut on the Features toolbar or Insert > Cut > Sweep...Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep Parts and Features > Features Sweep profile sketch and the path we created in planes. we also can sketch the sweep path in planes model or use the model edge for the path. Profile sketch by sketch path preview sweep If we use a guide curve, making coincident or using guide curves and profiles. Click Swept Surface on the Surfaces toolbar, or click Insert, Surface, Sweep. Set the Set the PropertyManager options. Click OK.

Make it sketch driven patterns

Saturday, February 27, 2016

Creates the pattern using only the geometry (faces and edges) of the features, rather than patterning and solving each instance of the features. The Geometry Pattern option speeds up the creation and rebuilding of the pattern. You cannot create geometry patterns of features that have faces merged with the rest of the part. On learning solidwork this time we will try to make the facility located in solidwork namely Sketch Driven Patterns By using the sketch points, we can determine the pattern features. This feature is spread across a pattern for each point in the sketch. we can use sketch driven patterns for holes or other feature instances. Bodies to Pattern. For multibody parts, select a separate body to create a sketch driven pattern. To create a sketch driven pattern: Open a sketch on the face. Create a seed feature on the model. Click Point or Tools, Sketch Entity, Point and add multiple sketch points to represent a pattern that we want to create, based on the seed feature. Close the sketch. Click Sketch Driven Pattern on the Features toolbar, or click Insert, Pattern / Mirror, Sketch Driven Pattern. If necessary, use the flyout FeatureManager design tree to select Sketch References used as a pattern.

Move on Solidworks

Monday, February 22, 2016

Learning solidworks: Move Move or Copy entities by selecting from and to points or by using X and Y destination coordinates Menu to move the sketch which we have previously made. 1. In Edit Sketch mode: - Click Move Entities (Sketch toolbar) -Tools, Sketch Tools, Move 2. In the PropertyManager, under Entities to Move - Select sketch entities for Sketch item or annotations - Select Keep relations to maintain its position among the entities that do not want to be moved. 3.Under Parameters: - Select From / To, click Start point to set a Base point, and then drag to position the sketch entities. -or Select X / Y and set values for Delta X and Delta Y to position the sketch entities. 4. Click Repeat to again change the position of sketch entities 5.Klik Below I have put in a simple application, please

Click Solidworks Insert Cut Extrude

Saturday, February 20, 2016

How can I extrude cut or do a cut with a surface a specific feature. If you take a look at the picture below. I have the extrusion of the round piston and that is cut a specific way. Now I have an extrusion inside the walls of the piston and that is cut the same way but at an offset from the piston. To create an extrude feature: Create a sketch. Click one of the extrude tools: Extruded Boss/Base on the Features toolbar, or click Insert, Boss/Base, Extrude Extruded Cut on the Features toolbar, or click Insert, Cut, Extrude Extruded Surface on the Surfaces toolbar, or click Insert, Surface, Extrude Set the PropertyManager options. To extrude in both directions from the sketch plane, set the PropertyManager options in Direction 1 and Direction 2. To extrude as a thin feature, set the PropertyManager options in Thin Feature. When you drag the manipulator to set the size, an Instant3D ruler appears so you can set precise values. Click .

Convert Entities SolidWorks tutorial

Sunday, February 14, 2016

Convert Entities are used to create curves in a sketch by projecting a rib (edge) / side (face) / curve / contour sketch / series of ribs (edge) / series sketch curve into the sketch field. You can create one or more curves in a sketch by projecting an edge, loop, face, curve, or external sketch contour, set of edges, or set of sketch curves onto the sketch plane. Convert Entities tool will be used as a sketch for the path in Swept Cut feature. 1. Open SolidWorks, File> New> part 2. We create a sketch with a plane Front 3. Exit Sketch, click the Features tab> select the features Extruded Boss / Base, to end the Condition = Mid Plane, depth = 20mm. Click OK. 4. Sweep feature requires two sketch, one as Path and only as a Profile. We will make a sketch for the path first. Create a sketch with a plane in the Front. We will select all the curves at the top (press the Ctrl key to select more than one object). 5. Press the Convert Entities, all objects that have been previously selected will be projected into the Front Plane and transformed into sketch entities. 6. Press the Trim Entities, select Power Trim to extend the ends of the sketch. Mouse left click the sketch entity at the threshold to be extended, the drop (Drag) that edge. 7. Exit Sketch, we will create a profile sketch for the sweep, to sketch the plane perpendicular to one end of the sketch for the path. In the pulldown menu, click Insert> Reference Geometry> Plane. Select Normal to select lines and points as shown below. 8. Create a sketch with Plane just created. Click the View> Normal To. 9. Create a circle with the center of the circle at the point of Origin. 10. Exit Sketch, We've got two sketch for the Sweep feature, click the Features tab> select the features Swept Cut, for Profile select the circle and to select sketch elongated path, as in the image below. 11. The results are as follows (Plane to sketch Profile on Hide). 12. Done.

Make a Swept Boss Base Solidworks

Tuesday, February 9, 2016

SolidWorks tutorial we will learn how to make a sweep with SolidWorks and in this tutorial you will learn how to use the following functions: 2D sketch, create a 2D circle, making Swept Boss / Base. The steps to create features swept boss / base Open new part Click the sketch, click the line and select right plane Create a sketch like this Then create a new plane is the front plane On the front plane that create a polygon sketch click ok Click on the features and click swept boss / base Sweep and a box will appear on top of the box select the polygon whereas the bottom box select the first sketch click Ok Sweep creates a base, boss, cut, or surface by moving a profile (section) along a path, according to these rules: The profile must be closed for a base or boss sweep feature; the profile may be open or closed for a surface sweep feature. The guide curve must be coincident with the profile or with a point in the profile sketch. Neither the section, the path, nor the resulting solid can be self-intersecting. The path may be a set of sketched curves contained in one sketch, a curve, or a set of model edges. The path must intersect the plane of the profile. The path may be open or closed.