Solidworks tutorial Sketch smart dimension

Sunday, March 13, 2016

To use sketch smart dimension is very easy. We dimension 2D or 3D sketch entities with the Smart Dimension tool. We can drag or delete a dimension while the Smart Dimension tool is active. Dimension types are determined by the sketch entities you select. For some types of dimensions (point-to-point, angular, circular), the location where you place the dimension also affects the type of dimension that is added Start program SolidWorks and begin open a new part. Select the Front Plane and sketching. Make a sketch of the line consisting of four rows and three dimensions. Make sure the lower left corner of the sketch is the origin. Click on the Arc Tangent in the PropertyManager. Click on the right end of the horizontal line above. Place the tip of the arc at the tip end of a horizontal line above. Press the button to end the command line. Set the dimensions for the bow that we just created Click on the Smart dimension in-Command Manager. Create a dimension for each line of 60, 30, 20 Click on the arc. Set dimensions. Create an arc radius to 65. Click on OK. Creating a curved edge between the arc and the vertical line. Click on the Sketch Fillet CommandManager. Create a radius of 10 mm 'in the Property Manager-. Click on the bow, to the left of the vertical line. Click on the vertical line, just below the arc. Click on OK.

0 comments:

Post a Comment